[1058] | 1 | # This document is a how-to for installing a Fedora scripts.mit.edu server. |
---|
[1693] | 2 | # It is semi-vaguely in the form of a shell script, but is not really |
---|
| 3 | # runnable as it stands. |
---|
[181] | 4 | |
---|
[1973] | 5 | # Notation |
---|
| 6 | # [PRODUCTION] Production server that will be put into the pool |
---|
| 7 | # [WIZARD] Semi-production server that will only have |
---|
| 8 | # daemon.scripts-security-upd bits, among other |
---|
| 9 | # restricted permissions |
---|
| 10 | # [TESTSERVER] Completely untrusted server |
---|
| 11 | |
---|
[1693] | 12 | # This is actually just "pick an active scripts server". It can't be |
---|
| 13 | # scripts.mit.edu because our networking config points that domain |
---|
| 14 | # at localhost, and if our server is not setup at that point things |
---|
| 15 | # will break. |
---|
[1973] | 16 | source_server="shining-armor.mit.edu" |
---|
[1259] | 17 | |
---|
[1693] | 18 | # 'branch' is the current svn branch you are on. You want to |
---|
| 19 | # use trunk if your just installing a new server, and branches/fcXX-dev |
---|
| 20 | # if your preparing a server on a new Fedora release. |
---|
| 21 | branch="trunk" |
---|
[1063] | 22 | |
---|
[1693] | 23 | # 'server' is the public hostname of your server, for SCP'ing files |
---|
| 24 | # to and from. |
---|
| 25 | server=YOUR-SERVER-NAME-HERE |
---|
[1063] | 26 | |
---|
[2046] | 27 | # ----------------------------->8-------------------------------------- |
---|
| 28 | # FIRST TIME INSTRUCTIONS |
---|
| 29 | # |
---|
[1973] | 30 | # [PRODUCTION] If this is the first time you've installed this hostname, |
---|
| 31 | # you will need to update a bunch of files to add support for it. These |
---|
| 32 | # include: |
---|
[1696] | 33 | # o Adding all aliases to /etc/httpd/conf.d/scripts-vhost-names.conf |
---|
| 34 | # (usually this is hostname, hostname.mit.edu, h-n, h-n.mit.edu, |
---|
| 35 | # scriptsN, scriptsN.mit.edu, and the IP address.) |
---|
| 36 | # o Adding routing rules for the static IP in |
---|
| 37 | # /etc/sysconfig/network-scripts/route-eth1 |
---|
| 38 | # o Adding the IP address to the hosts file (same hosts as for |
---|
| 39 | # scripts-vhost-names) |
---|
[1704] | 40 | # o Update SSH config at |
---|
| 41 | # - server/fedora/config/etc/ssh/shosts.equiv |
---|
| 42 | # - server/fedora/config/etc/ssh/ssh_known_hosts |
---|
| 43 | # - server/fedora/config/etc/ssh/sshd_config : DenyUsers |
---|
| 44 | # (the last part is critical to ensure that rooting one server |
---|
| 45 | # doesn't give you root to all the other servers) |
---|
[1696] | 46 | # o Put the hostname information in LDAP so SVN and Git work |
---|
| 47 | # o Set up Nagios monitoring on sipb-noc for the host |
---|
| 48 | # o Set up the host as in the pool on r-b/r-b /etc/heartbeat/ldirectord.cf |
---|
[2046] | 49 | # o Update locker/etc/known_hosts |
---|
| 50 | # |
---|
| 51 | # You will also need to prepare the keytabs for credit-card. In particular, |
---|
| 52 | # use ktutil to combine the host/scripts.mit.edu and |
---|
| 53 | # host/scripts-vhosts.mit.edu keys with host/this-server.mit.edu in |
---|
| 54 | # the keytab. Do not use 'k5srvutil change' on the combined keytab |
---|
| 55 | # or you'll break the other servers. (real servers only). Be |
---|
| 56 | # careful about writing out the keytab: if you write it to an |
---|
| 57 | # existing file the keys will just get appended. The correct |
---|
| 58 | # credential list should look like: |
---|
| 59 | # ktutil: l |
---|
| 60 | # slot KVNO Principal |
---|
| 61 | # ---- ---- --------------------------------------------------------------------- |
---|
| 62 | # 1 5 host/old-faithful.mit.edu@ATHENA.MIT.EDU |
---|
| 63 | # 2 3 host/scripts-vhosts.mit.edu@ATHENA.MIT.EDU |
---|
| 64 | # 3 2 host/scripts.mit.edu@ATHENA.MIT.EDU |
---|
| 65 | # |
---|
| 66 | # The LDAP keytab should be by itself, so be sure to delete it and |
---|
| 67 | # put it in its own file. |
---|
| 68 | # ----------------------------->8-------------------------------------- |
---|
[1696] | 69 | |
---|
[2046] | 70 | # Start with a Scripts kickstarted install of Fedora (install-fedora) |
---|
[1259] | 71 | |
---|
[2046] | 72 | # Take updates, reboot if there's a kernel update. |
---|
| 73 | yum update -y |
---|
[1259] | 74 | |
---|
[2046] | 75 | # Get rid of network manager |
---|
| 76 | yum remove NetworkManager |
---|
| 77 | |
---|
| 78 | # This is superseded by credit-card, but only for [PRODUCTION] |
---|
| 79 | # Don't use credit-card on [WIZARD]: it will put in the wrong creds! |
---|
| 80 | # |
---|
| 81 | # # All types of servers will have an /etc/daemon.keytab file, however, |
---|
| 82 | # # different types of server will have different credentials in this |
---|
| 83 | # # keytab. |
---|
| 84 | # # [PRODUCTION] daemon.scripts |
---|
| 85 | # # [WIZARD] daemon.scripts-security-upd |
---|
| 86 | # # [TESTSERVER] daemon.scripts-test |
---|
| 87 | |
---|
| 88 | # Check out the scripts /etc configuration |
---|
| 89 | cd /root |
---|
| 90 | \cp -a etc / |
---|
| 91 | chmod 0440 /etc/sudoers |
---|
| 92 | |
---|
| 93 | # Make sure network is working. Kickstart should have |
---|
[1693] | 94 | # configured eth0 and eth1 correctly; use service network restart |
---|
[2046] | 95 | # to add the new routes from etc in route-eth1. |
---|
| 96 | systemctl restart network.service |
---|
| 97 | # Check everything worked: |
---|
[1693] | 98 | route |
---|
| 99 | ifconfig |
---|
| 100 | cat /etc/hosts |
---|
| 101 | cat /etc/sysconfig/network-scripts/route-eth1 |
---|
[1259] | 102 | |
---|
[1693] | 103 | # This is the point at which you should start updating scriptsified |
---|
| 104 | # packages for a new Fedora release. Consult 'upgrade-tips' for more |
---|
| 105 | # information. |
---|
| 106 | yum install -y scripts-base |
---|
| 107 | # Some of these packages are naughty and clobber some of our files |
---|
| 108 | cd /etc |
---|
| 109 | svn revert resolv.conf hosts sysconfig/openafs |
---|
[1259] | 110 | |
---|
[1058] | 111 | # Replace rsyslog with syslog-ng by doing: |
---|
[1259] | 112 | rpm -e --nodeps rsyslog |
---|
[1693] | 113 | yum install -y syslog-ng |
---|
[2046] | 114 | systemctl enable syslog-ng.service |
---|
[861] | 115 | |
---|
[1058] | 116 | # Install the full list of RPMs that users expect to be on the |
---|
[1259] | 117 | # scripts.mit.edu servers. |
---|
| 118 | rpm -qa --queryformat "%{Name}.%{Arch}\n" | sort > packages.txt |
---|
| 119 | # arrange for packages.txt to be passed to the server, then run: |
---|
[1693] | 120 | # --skip-broken will (usually) prevent you from having to sit through |
---|
| 121 | # several minutes of dependency resolution until it decides that |
---|
| 122 | # it can't install /one/ package. |
---|
| 123 | yum install -y --skip-broken $(cat packages.txt) |
---|
[1259] | 124 | |
---|
[1698] | 125 | # Make sure sendmail isn't installed |
---|
| 126 | yum remove sendmail |
---|
| 127 | |
---|
[1190] | 128 | # Check which packages are installed on your new server that are not |
---|
| 129 | # in the snapshot, and remove ones that aren't needed for some reason |
---|
| 130 | # on the new machine. Otherwise, aside from bloat, you may end up |
---|
| 131 | # with undesirable things for security, like sendmail. |
---|
[1693] | 132 | rpm -qa --queryformat "%{Name}.%{Arch}\n" | grep -v kernel | sort > newpackages.txt |
---|
| 133 | diff -u packages.txt newpackages.txt | grep -v kernel | less |
---|
[1382] | 134 | # here's a cute script that removes all extra packages |
---|
[1693] | 135 | yum erase -y $(grep -Fxvf packages.txt newpackages.txt) |
---|
[1973] | 136 | # 20101208 - Mysteriously we manage to get these extra packages |
---|
| 137 | # from kickstart: mcelog mobile-broadband-provider-info |
---|
| 138 | # ModemManager PackageKit |
---|
[1190] | 139 | |
---|
[1693] | 140 | # We need an upstream version of cgi which we've packaged ourselves, but |
---|
| 141 | # it doesn't work with the haskell-platform package which expects |
---|
| 142 | # explicit versions. So temporarily rpm -e the package, and then |
---|
| 143 | # install it again after you install haskell-platform. [Note: You |
---|
| 144 | # probably won't need this in Fedora 15 or something, when the Haskell |
---|
| 145 | # Platform gets updated.] |
---|
| 146 | rpm -e ghc-cgi-devel ghc-cgi |
---|
| 147 | yum install -y haskell-platform |
---|
| 148 | yumdownloader ghc-cgi |
---|
| 149 | yumdownloader ghc-cgi-devel |
---|
| 150 | rpm -i ghc-cgi*1.8.1*.rpm |
---|
| 151 | |
---|
[2046] | 152 | # Note: Since ultimately we'd like to move away from using per-language |
---|
| 153 | # package manager and all of these be RPMs, it is of questionable |
---|
| 154 | # importance how much /good/ automation for these is necessary. |
---|
[1237] | 155 | |
---|
[2046] | 156 | # Warning: For a new release, we're supposed to check if Fedora has |
---|
| 157 | # packaged up the RPM. Unfortunately we don't really have good incants |
---|
| 158 | # for this. |
---|
| 159 | |
---|
[1058] | 160 | # Install the full list of perl modules that users expect to be on the |
---|
[1108] | 161 | # scripts.mit.edu servers. |
---|
[1693] | 162 | cd /root |
---|
[1259] | 163 | export PERL_MM_USE_DEFAULT=1 |
---|
[1693] | 164 | cpan # this is interactive, enter the next two lines |
---|
[1259] | 165 | o conf prerequisites_policy follow |
---|
| 166 | o conf commit |
---|
| 167 | # on a reference server |
---|
| 168 | perldoc -u perllocal | grep head2 | cut -f 3 -d '<' | cut -f 1 -d '|' | sort -u | perl -ne 'chomp; print "notest install $_\n" if system("rpm -q --whatprovides \"perl($_)\" >/dev/null 2>/dev/null")' > perl-packages.txt |
---|
| 169 | # arrange for perl-packages.txt to be transferred to server |
---|
| 170 | cat perl-packages.txt | perl -MCPAN -e shell |
---|
[812] | 171 | |
---|
[1058] | 172 | # Install the Python eggs and Ruby gems and PEAR/PECL doohickeys that are on |
---|
| 173 | # the other scripts.mit.edu servers and do not have RPMs. |
---|
[1259] | 174 | # The general mode of operation will be to run the "list" command |
---|
| 175 | # on both servers, see what the differences are, check if those diffs |
---|
| 176 | # are packaged up as rpms, and install them (rpm if possible, native otherwise) |
---|
[1178] | 177 | # - Look at /usr/lib/python2.6/site-packages and |
---|
| 178 | # /usr/lib64/python2.6/site-packages for Python eggs and modules. |
---|
[1259] | 179 | # There will be a lot of gunk that was installed from packages; |
---|
[1693] | 180 | # easy-install.pth in /usr/lib/ will tell you what was easy_installed. |
---|
[1178] | 181 | # First use 'yum search' to see if the relevant package is now available |
---|
| 182 | # as an RPM, and install that if it is. If not, then use easy_install. |
---|
[1432] | 183 | # Pass -Z to easy_install to install them unzipped, as some zipped eggs |
---|
| 184 | # want to be able to write to ~/.python-eggs. (Also makes sourcediving |
---|
| 185 | # easier.) |
---|
[2046] | 186 | # 'easy_install AuthKit jsonlib2 pygit' |
---|
| 187 | cat /usr/lib/python2.7/site-packages/easy-install.pth | grep "^./" | cut -c3- | cut -f1 -d- > egg.txt |
---|
[1698] | 188 | cat egg.txt | xargs easy_install -Z |
---|
[2046] | 189 | |
---|
[1058] | 190 | # - Look at `gem list` for Ruby gems. |
---|
[1178] | 191 | # Again, use 'yum search' and prefer RPMs, but failing that, 'gem install'. |
---|
[1259] | 192 | # ezyang: rspec-rails depends on rspec, and will override the Yum |
---|
| 193 | # package, so... don't use that RPM yet |
---|
[2046] | 194 | # XXX This doesn't do the right thing for old version gems |
---|
[1693] | 195 | gem list --no-version > gem.txt |
---|
| 196 | gem install $(gem list --no-version | grep -Fxvf - gem.txt) |
---|
[2046] | 197 | # Also, we need to install the old rails version |
---|
| 198 | |
---|
[1058] | 199 | # - Look at `pear list` for Pear fruits (or whatever they're called). |
---|
[1178] | 200 | # Yet again, 'yum search' for RPMs before resorting to 'pear install'. Note |
---|
| 201 | # that for things in the beta repo, you'll need 'pear install package-beta'. |
---|
[1259] | 202 | # (you might get complaints about the php_scripts module; ignore them) |
---|
[1693] | 203 | pear list | tail -n +4 | cut -f 1 -d " " > pear.txt |
---|
| 204 | pear config-set preferred_state beta |
---|
| 205 | pear channel-update pear.php.net |
---|
| 206 | pear install $(pear list | tail -n +4 | cut -f 1 -d " " | grep -Fxvf - pear.txt) |
---|
[2046] | 207 | |
---|
[1190] | 208 | # - Look at `pecl list` for PECL things. 'yum search', and if you must, |
---|
[1462] | 209 | # 'pecl install' needed items. If it doesn't work, try 'pear install |
---|
[1544] | 210 | # pecl/foo' or 'pecl install foo-beta' or those two combined. |
---|
[1693] | 211 | pecl list | tail -n +4 | cut -f 1 -d " " > pecl.txt |
---|
| 212 | pecl install --nodeps $(pecl list | tail -n +4 | cut -f 1 -d " " | grep -Fxvf - pecl.txt) |
---|
[785] | 213 | |
---|
[2046] | 214 | # ----------------------------->8-------------------------------------- |
---|
| 215 | # INFINITE CONFIGURATION |
---|
[387] | 216 | |
---|
[2046] | 217 | # Run credit-card to clone in credentials and make things runabble |
---|
| 218 | python host.py push $server |
---|
[1973] | 219 | |
---|
[2046] | 220 | # [PRODUCTION/WIZARD] Fix the openafs /usr/vice/etc <-> /etc/openafs |
---|
| 221 | # mapping. |
---|
| 222 | echo "/afs:/usr/vice/cache:10000000" > /usr/vice/etc/cacheinfo |
---|
| 223 | echo "athena.mit.edu" > /usr/vice/etc/ThisCell |
---|
| 224 | # [TESTSERVER] If you're installing a test server, this needs to be |
---|
| 225 | # much smaller; the max filesize on XVM is 10GB. Pick something like |
---|
| 226 | # 500000. Also, some of the AFS parameters are kind of retarded (and if |
---|
| 227 | # you're low on disk space, will actually exhaust our inodes). Edit |
---|
| 228 | # these parameters in /etc/sysconfig/openafs |
---|
| 229 | echo "/afs:/usr/vice/cache:500000" > /usr/vice/etc/cacheinfo |
---|
| 230 | XXX TODO COMMANDS |
---|
[1693] | 231 | |
---|
[2046] | 232 | # Test that zephyr is working |
---|
| 233 | systemctl enable zhm.service |
---|
| 234 | systemctl start zhm.service |
---|
| 235 | echo 'Test!' | zwrite -d -c scripts -i test |
---|
[562] | 236 | |
---|
[2046] | 237 | # Check out the scripts /usr/vice/etc configuration |
---|
| 238 | cd /root/vice |
---|
| 239 | \cp -a etc /usr/vice |
---|
[1259] | 240 | |
---|
[1973] | 241 | # [PRODUCTION] Set up replication (see ./install-ldap). |
---|
[1693] | 242 | # You'll need the LDAP keytab for this server: be sure to chown it |
---|
| 243 | # fedora-ds after you create the fedora-ds user |
---|
| 244 | ls -l /etc/dirsrv/keytab |
---|
| 245 | cat install-ldap |
---|
[785] | 246 | |
---|
[2046] | 247 | systemctl enable openafs-client.service |
---|
| 248 | systemctl enable dirsrv.service |
---|
| 249 | systemctl enable nslcd.service |
---|
| 250 | systemctl enable nscd.service |
---|
| 251 | systemctl enable postfix.service |
---|
| 252 | systemctl enable nrpe.service |
---|
| 253 | systemctl enable httpd.service # not for [WIZARD] |
---|
[1973] | 254 | |
---|
[2046] | 255 | systemctl start openafs-client.service |
---|
| 256 | systemctl start dirsrv.service |
---|
| 257 | systemctl start nslcd.service |
---|
| 258 | systemctl start nscd.service |
---|
| 259 | systemctl start postfix.service |
---|
| 260 | systemctl start nrpe.service |
---|
| 261 | systemctl start httpd.service # not for [WIZARD] |
---|
[1973] | 262 | |
---|
[2046] | 263 | # Note about OpenAFS: Check that fs sysname is correct. You should see, |
---|
| 264 | # among others, 'amd64_fedoraX_scripts' (vary X) and 'scripts'. If it's |
---|
| 265 | # not, you probably did a distro upgrade and should update |
---|
| 266 | # /etc/sysconfig/openafs (XXX this is wrong: figuring out new |
---|
| 267 | # systemd world order). |
---|
| 268 | fs sysname |
---|
[818] | 269 | |
---|
[1259] | 270 | # Postfix doesn't actually deliver mail; fix this |
---|
| 271 | cd /etc/postfix |
---|
| 272 | postmap virtual |
---|
[1178] | 273 | |
---|
[1451] | 274 | # Munin might not be monitoring packages that were installed after it |
---|
| 275 | munin-node-configure --suggest --shell | sh |
---|
| 276 | |
---|
[1058] | 277 | # Run fmtutil-sys --all, which does something that makes TeX work. |
---|
[1693] | 278 | # (Note: this errors on XeTeX which is ok.) |
---|
[1259] | 279 | fmtutil-sys --all |
---|
[803] | 280 | |
---|
[1058] | 281 | # Ensure that PHP isn't broken: |
---|
[1259] | 282 | mkdir /tmp/sessions |
---|
| 283 | chmod 01777 /tmp/sessions |
---|
[1699] | 284 | # XXX: this seems to get deleted if tmp gets cleaned up, so we |
---|
| 285 | # might need something a little better (maybe init script.) |
---|
[954] | 286 | |
---|
[1259] | 287 | # Fix etc by making sure none of our config files got overwritten |
---|
| 288 | cd /etc |
---|
[1693] | 289 | svn status -q |
---|
| 290 | # Some usual candidates for clobbering include nsswitch.conf and |
---|
| 291 | # sysconfig/openafs |
---|
[1973] | 292 | # [WIZARD/TEST] Remember that changes you made should not get |
---|
| 293 | # reverted! |
---|
[1259] | 294 | |
---|
[1382] | 295 | # ThisCell got clobbered, replace it with athena.mit.edu |
---|
| 296 | echo "athena.mit.edu" > /usr/vice/etc/ThisCell |
---|
| 297 | |
---|
[1058] | 298 | # Reboot the machine to restore a consistent state, in case you |
---|
[1693] | 299 | # changed anything. (Note: Starting kdump fails (this is ok)) |
---|
[875] | 300 | |
---|
[2046] | 301 | # When all is said and done, fix up the Subversion checkouts |
---|
| 302 | cd /etc |
---|
| 303 | svn switch --relocate svn://$source_server/ svn://scripts.mit.edu/ |
---|
| 304 | cd /usr/vice/etc |
---|
| 305 | svn switch --relocate svn://$source_server/ svn://scripts.mit.edu/ |
---|
| 306 | cd /srv/repository |
---|
| 307 | # Some commands should be run as the scripts-build user, not root. |
---|
| 308 | alias asbuild="sudo -u scripts-build" |
---|
| 309 | asbuild svn switch --relocate svn://$source_server/ svn://scripts.mit.edu/ |
---|
| 310 | asbuild svn up # verify scripts.mit.edu works |
---|
| 311 | |
---|
| 312 | # ------------------------------->8------------------------------- |
---|
| 313 | # ADDENDA AND MISCELLANEOUS THINGS |
---|
| 314 | |
---|
[1693] | 315 | # [OPTIONAL] Your machine's hostname is baked in at install time; |
---|
| 316 | # in the rare case you need to change it: it appears to be in: |
---|
[1259] | 317 | # o /etc/sysconfig/network |
---|
| 318 | # o your lvm thingies; probably don't need to edit |
---|
[1382] | 319 | |
---|
[2046] | 320 | # [WIZARD/TESTSERVER] If you are setting up a non-production server, |
---|
| 321 | # there are some services that it won't provide, and you will need to |
---|
| 322 | # make it talk to a real server instead. In particular: |
---|
| 323 | # - We don't serve the web, so don't bind scripts.mit.edu |
---|
| 324 | # - We don't serve LDAP, so use another server |
---|
| 325 | # This involves editing the following files: |
---|
| 326 | # o /etc/sysconfig/network-scripts/ifcfg-lo:0 |
---|
| 327 | # o /etc/sysconfig/network-scripts/ifcfg-lo:1 |
---|
| 328 | # o /etc/sysconfig/network-scripts/ifcfg-lo:2 |
---|
| 329 | # o /etc/sysconfig/network-scripts/ifcfg-lo:3 |
---|
| 330 | \rm /etc/sysconfig/network-scripts/ifcfg-lo:{0,1,2,3} |
---|
| 331 | # o /etc/ldap.conf |
---|
| 332 | # add: host scripts.mit.edu |
---|
| 333 | # o /etc/{nss-ldapd,nslcd}.conf |
---|
| 334 | # replace: uri ldapi://%2fvar%2frun%2fdirsrv%2fslapd-scripts.socket/ |
---|
| 335 | # with: uri ldap://scripts.mit.edu/ |
---|
| 336 | # o /etc/openldap/ldap.conf |
---|
| 337 | # add: URI ldap://scripts.mit.edu/ |
---|
| 338 | # BASE dc=scripts,dc=mit,dc=edu |
---|
| 339 | # o /etc/httpd/conf.d/vhost_ldap.conf |
---|
| 340 | # replace: VhostLDAPUrl "ldap://127.0.0.1/ou=VirtualHosts,dc=scripts,dc=mit,dc=edu" |
---|
| 341 | # with: VhostLDAPUrl "ldap://scripts.mit.edu/ou=VirtualHosts,dc=scripts,dc=mit,dc=edu" |
---|
| 342 | # o /etc/postfix/virtual-alias-{domains,maps}-ldap.cf |
---|
| 343 | # replace: server_host ldapi://%2fvar%2frun%2fdirsrv%2fslapd-scripts.socket/ |
---|
| 344 | # with: server_host = ldap://scripts.mit.edu |
---|
| 345 | # to use scripts.mit.edu instead of localhost. |
---|
| 346 | # XXX: someone should write sed scripts to do this |
---|
| 347 | |
---|
| 348 | # [WIZARD/TESTSERVER] If you are setting up a non-production server, |
---|
| 349 | # afsagent's cronjob will attempt to be renewing with the wrong |
---|
| 350 | # credentials (daemon.scripts). Change this: |
---|
| 351 | vim /home/afsagent/renew # replace all mentions of daemon.scripts.mit.edu |
---|
| 352 | |
---|
[1973] | 353 | # [TESTERVER] |
---|
| 354 | # - You need a self-signed SSL cert or Apache will refuse to start |
---|
| 355 | # or do SSL. Generate with: |
---|
[1382] | 356 | openssl req -new -x509 -keyout /etc/pki/tls/private/scripts.key -out /etc/pki/tls/certs/scripts.cert -nodes |
---|
[1973] | 357 | # Also make /etc/pki/tls/certs/ca.pem match up (XXX what's the |
---|
| 358 | # incant for that?) |
---|
| 359 | |
---|
| 360 | # [TESTSERVER] More stuff for test servers |
---|
[1382] | 361 | # - Make (/etc/aliases) root mail go to /dev/null, so we don't spam people |
---|
| 362 | # - Edit /etc/httpd/conf.d/scripts-vhost-names.conf to have scripts-fX-test.xvm.mit.edu |
---|
| 363 | # be an accepted vhost name |
---|
| 364 | # - Look at the old test server and see what config changes are floating around |
---|